BINA MAXICOAT
Interior Wall & Ceiling Matt Finish
BINA MAXICOAT is specially formulated water based copolymer emulsion paint. It has ideal mixing content which provide a matt finishing to almost kind of surface. Smooth finish with low smell and non-toxic which is an environmentally friendly coating. BINA MAXICOAT is widely recommended for area such as interior walls and concrete, masonry surfaces.
Surface Preparation
The surface should be clean (free from oil, grease and other surface contaminants), compact and dry. The surface should be carefully inspected to determine the preparation work to be earned out. Remove all the loose paints by using gross brush or high pressure waterjet and ensure that surfaces are free from contaminations and oil stains prior to painting work in order to have higher and maximum performance. Do not apply paint on wet walls or when raining. For new cement surfaces, ensure that the surfaces are thoroughly dry before painting. The concrete shall be allowed to cure for at least 14 days before application of coatings is allowed (28 days recommended). Otherwise, premature paint failure may occur.
Application Data
Touch Dry: 1/2 – 1 hour
Recoat: 1 – 2 hours
Coverage: 10 – 12 metre cube per litre
No. of coats: Minimum 2 coats.
Recoat: 1 – 2 hours
Coverage: 10 – 12 metre cube per litre
No. of coats: Minimum 2 coats.