BINA WATERPROOF 5000

RM150.00 MYR

Decorative and Waterproofing Roof Finish

BINA MULTIPROOF 5000 is a water-based single component and elastomeric waterproofing coating. Based on high performance acrylic polymers and good for fliflexible seamless waterproofing membrane. Cement sand screeding panels can be laid over as protective slab at roof slab or concrete pavements.

Method of Application

All surfaces to be coated must be cleaned, dry and free from dirt, dust, grease, oil, wax, laitance and etc.
Dilute with 20% of water as a priming coat and apply by brush, roller, squeegee or other spray equipment. The actual method of application depends on site condition.
Minimum two coats are recommended for a satisfactory performance with approximate rate of 1.0 kg/m for each coat.
At crack surfaces, should be reinforced with a glass fiber mat between each coat.
Allow 12 hours between coats. A final curing time of 48 hours should be achieved before any works to be proceed.